3M Stencil #507

This hand cut stencil has a green rubber backing with rubber adhesive and dark green polyethylene film high release liner.

Available in 12 1/4" and 24 1/2" widths.

3M Stencil #510

A single liner, low/medium tack stencil used best on stone and pre-painted or soft wood surfaces. Made specifically for hand and die-cutting.

Available in 12 3/4", 15", 18 3/4", 21", 25" and 30" widths.

3M Stencil #519Y, #519YS, #519YT, #519YP, #519YP2

A tan stencil for die-cutting stencil press, computer or hand cutting. The double liner helps prevent letters/designs from distortion when transferring stencil. The light tan color helps provide an excellent contrast and the more natural rubber provides an improved blast reistance than the #509 family.

Available in 10 1/2", 15", 18 3/4", 21", 25" and 30" widths. (#519 or #519Y)

Available in 15", 18 3/4", 21", 25" and 30" widths. (#519YT)

Available in 15" and 30" widths. (#519YS)

3M #520, #520S, #520T

Ideal for hand and die-cutting, this stencil features a gray rubber adhesive with an easy-release clear film liner than can be reversed for die-cutting. This medium-tack adhesive is roughly 25% more aggressive than the #510 family.

Available in 15", 18 3/4", 25" and 30" widths. (#520)

Available in 15" and 30" widths. (#520S)

Available in 15", 18 3/4", 25" and 30" widths. (#520T)

3M #2 Stencil Filler

Light beige rubber based coatings used to fill low areas and helps increase the adhesion of 3M Sandblast Stencils to stone monument surfaces during the sandblasting process. Typically used on smooth or polished surfaces.

Available in gallons or quarts.

3M #3 Stencil Filler

A light beige  coating of Sandblast Filler 3 can be used on axed or frosted stone surfaces when increased adhesion of 3M Sandblast Stencils is desired.

Available in gallons.