Anchor Style #111

A low-tack stencil designed specifically for easy hand cutting, which means less wear and tear on instruments. Panels can be easily and accurately replaced. White release liner is easily re-moved.
Available in 10 1/2", 12 3/4", 14 1/2", 18 3/4", 25" and 30" widths.

Anchor Style #112

A low-tack convertible stencil designed for machine or hand cutting without having to reserve the liner. Controlled release capable due to extra-heavy red liner.

Available in 12 3/4" and 25" widths.

Anchor Style #116

A high-tack, single back, computer stencil formulated to adhere to brick, raw wood surfaces and urethane foam board without using filler. Features trimmed edges and a clear, strong film liner that offers easy alignment and smooth, precise running on computerized sign-making machines.

NOTE: This stencil has a very aggressive adhesive system and is not recommended for use on soft woods without first testing a sample piece.

Available in 15" and 30" widths.

Anchor Style #117

A medium-tack version of #116 designed for use with computerized cutting machines, specifically made for use on pretreated and pre-painted surfaces. Can be used safely on glass, tile, sign foam and synthetic stone. A strong, clear film provides extra rigidity.

Available in 15" and 30" widths.

Anchor Style #120

A multi-prupose, medium-tack, dark blue liner stencil designed for shape and depth carving in glass, pretreated and pre-painted soft woods, tile, pretreated foam board or Plexiglass. This stencil is very easy to hand-cut. Fillers not normally required which simplifies application and cleanup.

Available in 20" width.

Anchor Style #123

Designed for machine or hand cutting. Has a 1mm clear polyester liner between outside blue liner and rubber stencil which eliminates taping during panel transfer to stone, yet allows easy blast-through.

Available in 10 1/2", 12 3/4", 14 1/2", 18 3/4", 21, 25" and 30" widths.

Anchor Style #124

Same as #123 with a blue liner. The computer holes are punched through the liner and rubber.

Available in 15" and 30" widths x 10 yards.

The 30" is also available in 20 yard rolls.

Anchor Style #125

A highack stencil designed for sandblasting raw wood and urethane foam board. Has an easy-release orange liner. The strength of the adhesive eliminates the need for filler or adhesives, saving you time and money. NOTE: Do not use on pre-painted sign or glass.

Available in 25" width.

Anchor Style #128

This 18mm hand cut stencil is deisgned for glass etching, light stone, tile and acrylic etching. The paper liner is easily removable. This stencil conforms nicely to irregular and curved surfaces and has a great blast resistance and leaves no residue when pulled off.

Available in 25" and 30" widths.

Anchor Style #130

The computer cut version of the popular style #128. This 18mm thick stencil can be ran through tractor-feed or friction cutters and used on glass, tile, light stone and acrylic etching. Has a petroleum-based adhesive system and can be run on computerized cutters that have a 1/2" on center style sprockets.

Available in 15", 20" and 30" widths.

Anchor Style #153

Designed for use on friction-feed cutter, which means that two wheels clamp down on the stencil and pull it through the computer while cutting letters and designs.  This type of computer has no sprockets, so holes are not needed. Stencil can be used on pretreated and pre-painted wood, thile, acrylics and urethane foam board. No filler required, saving you time and money.

Available in: 19 7/8" and 24" widths.

Anchor Style #154

Same construction as #124 computer stencil. Holes are IBM configuration (1/2" spacing) and should be compatible with any computerized cutting machine with matching sprockets.

Available in: 12 3/4", 15", 18", 25" and 30" widths.

The 25" and 30" widths are also available in 20 yard length rolls.

Anchor Style #156

Same as Style #116, except the hold pattern is for a 1/2" spaced sprockets computer cutter. NOTE: This stencil has a very aggressive adhesive system and is not for use on soft woods, pre-painted, pretreated or glass surfaces.

Available in 30" width.

Anchor Style #157

Same construction as #117, except the hole pattern is for a 1/2" spaced sprockets computer cutter (same as #156).

Available in 30" width.

Anchor Style #211 Filler

Specially designed and formulated to produce superior results with intertape stencils. Formulated for use on polished, frosted or axed surfaces. Use with stencil styles #111, #112, #117 and #157.

Anchor Style #223 Filler

Specially designed and formulated to produce superior results with intertape stencils. Can be used on polished, frosted or axed surfaces.

Use with Stencil Styles #123, #124, #129 and #154.

Anchor Style #333 Filler

This versatile filler is water washable, which minimizes fumes, fire hazards and waste spills. Best of all, this product lasts twice as long. This filler is compatible with all Intertape Stencils.

3M Stencil Style #507

This hand cut stencil has a green rubber backing with rubber adhesive and dark green polyethylene film high release liner.

Available in 12 1/4" and 24 1/2" widths.

3M Stencil Style #519, #519S, #519T, #519Y, #519YS, #519YT

A tan stencil for die-cutting stencil press, computer or hand cutting. The double liner helps prevent letters/designs from distortion when transferring stencil. The light tan color helps provide an excellent contrast and the more natural rubber provides an improved blast reistance than the #509 family.

Available in 10 1/2", 15", 18 3/4", 21", 25" and 30" widths. (#519 or #519Y)

Available in 15", 18 3/4", 21", 25" and 30" widths. (#519YT)

Available in 15" and 30" widths. (#519YS)

3M Style #520ETL and #520HLR

Same as style #520, but designed specifically for Gerber Computer Plotters. Additionally, the ETL contains an Extra Thick 4mm Liner that offers added security for and rigidity against plotter cut-through, making it ideal for protecting granite, marble or wood during sandblasting. The HLR contains a 2mm liner that saves money on the product while still offering a high quality controlled release liner, particularly for non-lifting computer cutting.

Available in 30" width.

3M Style #523T

This double liner stencil is designed for IBM Computer Plotters. It has the liner extended 1.25" beyond the rubber on both edges which helsp emliminate problems associated with plotter jams. This stencil contains no holes.

Available in 27 1/2" widths.